Skip to main content

Why don't Birds get Electrocuted on Power Cables?

Electricity is the flow of electrons through conductors. It always takes the easiest route, i.e., electricity always flows through a path of least resistance.
Now, the power cables through which electricity flows are made of copper. Copper offers least resistance and is a very good conductor of electricity. However, the bird's body offers greater resistance and is not a good conductor as copper. Hence, electricity ignores the bird and flows through the cables and birds don't get electrocuted. Besides this, electricity flows from its highest potential to its lowest. Now, the power cables usually run at different potentials. If bird's feet are on the same power cable, then they are at same potential. Thus, the bird doesn't get electrocuted. However, when the bird touches two cables with different potentials at the same time, then electricity will flow through the bird to go to the other cable with lower potential and the bird will get electrocuted.

Comments

Popular posts from this blog

How Energy conversion from coal is done?

Single generator sets of over 600 MW are now used in the UK, though there are many smaller generators in use. A 600 MW generator can supplythe average needs of over 1 million UK households. Three or four such generators are typically installed in a single large coal-fired station which isoften sited close to a coal mine, away from the city dwellers who consume the electricity. Such generators are usually driven by a compound arrangement of highpressure, intermediate-pressure and low-pressure turbines, increasing in size as the pressure decreases. Modern turbines rotate in a speed range from 1500 to 3500 r.p.m., usually 3000 r.p.m. for the UK’s 50 Hz system. For large coal-fired plant the steam pressure could be 25 megapascals (MPa) with steam temperatures of 500–600 °C to improve the thermodynamic efficiency. In nuclear reactors, which operate under less demanding conditions, the steam is superheated to about 5 MPa and 300 °C. Modern water tube boilers are complex and have ...

All about Electronics & Instrumentation Engineering)(EI)

  Vision : To be globally recognized as a seat of learning and innovation in Electronics for application to Communication, Transportation, Defence, Industry, Health Care, Entertainment, and many other consumer products.  Mission : 1). To produce quality engineers in the field of Electronics and related domains.  2) To conduct research and develop products in the fields of Chip design, Communication Systems, Electronics Instrumentation, Signal Processing and other related areas with strong emphasis on critical state of the art applications.  3) To grow in the area of Design and Manufacturing of chips, boards and systems.     Program Educational Objectives :  I.  To provide students a successful career in industry that meets the needs of national and multinational companies.  II.  To develop the ability among students to synthesize data and technical concepts for application to electronic product design and to solve real...

5 TOP FACTS LIGHTHOUSES

1  The builder of the Lighthouse of Alexandria, Sostratus – disobeying orders from the pharaoh Ptolemy – engraved his name and a dedication to the sea gods on the tower base. Fame 2  The technical term for the study of lighthouses is ‘pharology’, a word derived from Pharos, the island upon which the great Lighthouse of Alexandria once stood. Academia 3  George Meade built many notable lighthouses in the US during the classical lighthouse period. He is remembered in history as the winning general in the Battle of Gettysburg. War 4  The tallest lighthouse in the world is the Yokohama Marine Tower in Yokohama, Japan. The structure fl ashes alternately green and red every 20 seconds. Tallest 5  Originally lighthouses were lit merely with open fi res, only later progressing through candles, lanterns and electric lights. Lanterns tended to use whale oil as fuel.